Reputation: 3 %
Currently: offline
Member since 02/14/2012

jacksander

Jack Sander, from Houston, United States
Web: howtospecialist.com, Bio: I am a civil construction engineer with over 10 years experience in the field. I like sharing my expertise at my blog http://HowToSpecialist.com.
Add a new Link
Close (x)
Filter:
2%
6 folks
0%
1 folk
0%
1 folk

DIY Project - 5 ft Picnic Table | HowToSpecialist - How to Buil

howtospecialist.com/give-back/diy-project-5-ft-... - Details

jacksander: I was really surprised how quickly I was able to put this together. I chopped and sanded the wood before building. From start to finish it took me 6.5 hours and I took a couple of breaks. I struggled with the angled support underneath that is...

to tags:    

0%
1 folk

4x16 3 Cord Firewood Shed Plans

myoutdoorplans.com/shed/4x16-3-cord-firewood-sh... - Details

jacksander: This step by step diy project is about 4x16 3 cord firewood shed plans. This firewood shed is sturdy and it features an elegant design.

to tags:      

0%
1 folk

DIY Project - 2x4 Bench with Metal Backrest | HowToSpecialist -

howtospecialist.com/give-back/diy-project-2x4-b... - Details

jacksander: My wife wanted me to make a bench from a bed headboard that she bought 2nd hand. I used the 2x4 bench plans and adapted them to use this white steel headboard.

to tags:    

0%
0 folks

DIY Rabbit Hutch | MyOutdoorPlans | Free Woodworking Plans and

https://myoutdoorplans.com/brags/diy-rabbit-hutch-2 - Details

jacksander: First attempt at DIY woodwork enjoyed making this. Used slightly different materials and felted the roof.

to tags:    

0%
1 folk

DIY 6x12 Lean to Shed | MyOutdoorPlans | Free Woodworking Plans

myoutdoorplans.com/brags/diy-6x12-lean-to-shed-... - Details

jacksander: I loved the plans 6 x 12 x 10 height lean shed. Of course there were some modifications to the plans. Mainly the door. For the snow drifts & access in winter needed to have the door facing east.

0%
1 folk

DIY 10x14 Run In Shed

https://myoutdoorplans.com/brags/diy-10x14-run-in-shed - Details

jacksander: I am a first time "builder" and your plans were pretty easy to follow. I built this run in shed for alpacas that I am getting. Thanks for direction. The cost was approximately $800.

to tags:      

0%
1 folk
0%
1 folk

DIY Sandbox with Cover | MyOutdoorPlans | Free Woodworking Plan

myoutdoorplans.com/brags/diy-sandbox-with-cover... - Details

jacksander: I built this for my daughter. Made with pine. Only took a day including varnishing at a cost of 30 euros. I put the 10-degree cut on the side but there is still a recline on the seat-back and it meant I could add a parasol holder in the corner....

to tags:      

0%
1 folk
0%
1 folk

DIY Deer Proof Waist High Planter 

myoutdoorplans.com/brags/diy-deer-proof-waist-h... - Details

jacksander: My wife who does no wood working bought herself a compound miter saw, followed your plans and built not one but two each (!) of your bench and raised vegetable planter (modified to guard against deer)!

to tags:      

0%
1 folk

12x24 Attached Carport - Free DIY Plans

howtospecialist.com/carport/12x24-attached-carp... - Details

jacksander: This step by step diy woodworking project is about 12x24 attached carport plans. I had many requests for a large 12x24 carport with a lean roof. This carport features a sturdy 6x6 framing and a roof with a 3:12 slope. The roof structure is built...

to tags:    

0%
1 folk
0%
1 folk

DIY Wood Glider Bench with Stand | MyOutdoorPlans | Free Woodwo

myoutdoorplans.com/brags/diy-wood-glider-bench-... - Details

jacksander: Fun little project as a birthday gift for my wife. Thanks for the easy to follow free plans! A note on how to correctly mount the glider brackets would make these plans even better.

to tags:        

0%
1 folk

DIY Wood Lifeguard Chair | MyOutdoorPlans | Free Woodworking Pl

myoutdoorplans.com/brags/diy-wood-lifeguard-cha... - Details

jacksander: I substituted 2x6 and painted the wood before assembly. We get great compliments on this great chair. I'm going to follow the 2x4 directions and make one as a gift for my neighbor.

to tags:            

0%
1 folk

DIY 10 Foot Table

https://myoutdoorplans.com/brags/diy-10-foot-table - Details

jacksander: This ended up being a few hundred dollars in materials, I upgraded the top facing panels to Redwood and used Pressure treated pine for the support structure. I finished it with a semi transparent brown stain on the redwood and an enamel stain...

to tags:        

0%
1 folk

DIY 5 ft Porch Swing | MyOutdoorPlans | Free Woodworking Plans

https://myoutdoorplans.com/brags/diy-5-ft-porch-swing - Details

jacksander: So this was a fun project! This sweet swing made its way to the family farm/ lake house. Thanks for making it easy, love your site!

to tags:        

0%
1 folk

DIY 5 ft Garden Bench | MyOutdoorPlans | Free Woodworking Plans

https://myoutdoorplans.com/brags/diy-5-ft-garden-bench - Details

jacksander: I built this with a couple of modifications. I alternated 2x4 and 2x6" lumber for the seat and backrest, and designed some simple arm rests for it. I also used carriage bolts and titebond glue in place of screws in most areas.

to tags:      

0%
1 folk

How to Pour a Foundation and Slab for a Garage | HowToSpecialis

howtospecialist.com/structure/foundation/buildi... - Details

jacksander: This article is about how to demolish a small building and level the ground. This article is PART 2 of the workshop build, where I show you how to set and pour the foundation and the concrete slab. In this post, you will learn everything you...

to tags:        

prev  -  page 1  2  3  4  5  - 100 results in total  -  next
Close (x)
Results 1 - 20 of 100 - (1540 total) for jacksander

prev  -  next

jacksander's tags: