Samsung USB Device Not Recognized in Windows 11, 10, 8, 7

If you are facing the Samsung USB Device Not Recognized error on your Windows device, then check out the solutions shared below. 

When a Samsung USB device isn't identified by a Windows PC, it might be a stressful event that messes with your workflow and reduces output. An error message, the device not showing up in File Explorer, or failing to be found by device management tools might all be ways this problem shows itself. Hardware failures, communication flaws, or driver problems are a few of the many elements causing this issue. Effective resolution of the problem depends on knowledge about and ability to diagnose these possible causes. 

This tutorial will coach you through doable actions to fix the Samsung USB Device Not Recognized problem on a Windows PC. We will discuss standard fixes such as verifying USB port capability, upgrading or reinstalling drivers, and making sure the device is correctly attached. These guidelines will help you restore the functioning of your Samsung USB device and enable you to resume your work with the least disturbance. Whether your USB device is recognized and functioning normally or you are struggling with a more complicated problem, this tutorial seeks to provide straightforward, doable fixes to get it identified. 

Below we have shared a list of solutions that can help you resolve this error by performing USB 3.0 Driver Download and Updates. 

Solution 1: Deleted Corrupted Registry Files

Samsung USB devices may go undetected if a registry entry is corrupt. After you delete the corrupted registry key from the Samsung USB installation, your computer will be able to reinstall the device, which will also generate a new registry key. 

Open Registry Editor by running regedit.exe. 

Just remove the key that you see down below. 

HKEY_LOCAL_MACHINE>System>CurrentContolSet>Enum>USB>VID_0781&PID_7101 and/or VID_0000 

Put the Samsung USB drive back in and restart your computer; then, try again. 

Note: Get out of the Registry Editor without making any changes and look for the indicated key under the USB tab if you can't locate it. Your system's applications and files are stored in the Registry Editor database. Exercise caution while bringing up operations. Create a backup of the registry before proceeding. 

Solution 2: Check The Error On Samsung Drive

In most cases, a check disk will be useful when a USB drive appears in the computer's device list but cannot be accessed. Press the right mouse button on your Samsung USB drive while Windows File Explorer is open. Proceed to the following steps: Properties>Tools>Check>Start. 

Alternatively, you may use the command prompt to do disk checking. Log in as the administrator and launch cmd. After that, press Enter to run the chkdsk command on the Samsung flash drive. You may specify which volumes to scan and repair using this command. 

Solution 3: Update USB Drivers

Another way to fix this issue is by updating your USB drivers. It is a recommended process that should be practiced on a daily basis. Outdated or corrupted drivers can lead to issues like these. Therefore, it is for the best that you should always keep all your device drivers up-to-date. Here are some instructions that will walk you through the process. 

Step1: Click on the Windows icon present on the taskbar to open the Start menu. 

Step2: Type Control Panel in the Start menu’s search bar and hit the Enter key on your keyboard. 

Step3: On the Control Panel window, click on the View by and select the Large icons option from the drop-down menu. 

Step4: A new window will appear showing all the device drivers present on your Windows computer. Scroll down and look for the Universal Serial Bus Controllers section. 

Step5: Once you find it, click on the arrow icon next to it to expand it. 

Step6: Double-click on the Samsung USB device driver to open its Properties window. 

Step7: Over there, go to the Drivers tab section by choosing it from the top. 

Step8: Now, click on the Update driver button to proceed further. 

Step9: This will open a new pop-up window on your screen, click on the “Search automatically for drivers” option. 

Step10: Next, your computer will search online for any new USB drivers available that are compatible with your computer. And then, it will download it. 

Step11: Once downloaded, follow the on-screen instructions to install the drivers. 

Step12: After installing the drivers, restart your computer and it will fix the problem. 

Samsung USB not recognized may caused by many components, improper file system or corrupted files on USB device, corrupted registry entry, or out-of-date drivers on a connected machine. No matter what the cause is, it is important to figure out corresponding solutions. If you have any questions or doubts regarding this technical blog post, let us know in the comments below.