Page details
First discovered on:
02:48am, 12/30/09

All tags for this page:
23%
10 folks

Outcomes using exhaled nitric oxide measurements

http://asthmaeno.livejournal.com/16521.html - Details

danisaxon: FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but...

to tags:                   ...

Save this page to your bookmarks.

Tagged and described by the following users:

matttdav saved and folkd this page on 12/30/2009 02:48am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

lukemattt saved and folkd this page on 12/30/2009 02:51am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

ryanmattias saved and folkd this page on 12/30/2009 02:52am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

gracemareena saved and folkd this page on 12/30/2009 02:53am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

danisaxon saved and folkd this page on 12/30/2009 03:53am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

miajaccob saved and folkd this page on 12/30/2009 03:53am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

davhunter1 saved and folkd this page on 12/30/2009 03:54am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

sarajone8 saved and folkd this page on 12/30/2009 03:55am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

ericmattt saved and folkd this page on 12/30/2009 03:56am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

zoesera saved and folkd this page on 12/30/2009 03:57am

FENO was measured according to current guidelines using a NIOX MINO electrochemical analyser or a NIOX chemiluminescence analyser (both Aerocrine, Solna, Sweden).The latter was available at the Research Unit, 5km. from the Health Centre, but was used only when there was technical failure of the NIOX MINO. To validate FENO results, the sensors from the NIOX MINO device were tested against a calibrated standard, and where appropriate, a correction factor was applied to take account of signal drift.

This URL was also folkd by:

by matttdav, by lukemattt, by ryanmattias, by gracemareena, by danisaxon, by miajaccob, by davhunter1, by sarajone8, by ericmattt, by zoesera